Jeep Forums

12 Comments, last updated on Friday Sep 3 by To Jim

I installed a DUI HEI awhile back it works great, however, it would appear that I have a substantial range with my timing, from 5 to 13 degrees BTDC. Will the proper or improper timing (increasing or decreasing) have an impact on my oil pressure? Since installing the HEI the best Oil pressure wi

Been diagnosing my steering problems under my 96 Cherokee and today I found I've got some play at my pitman arm / drag link union. Does this mean I need to replace both the pitman arm and the drag link end, or do I just need to replace the drag link end? Additionally I may need to replace my tie r

1 Comment, last updated on Thursday Sep 2 by XJGary

22 Comments, last updated on Thursday Sep 2 by Bob

I have for sale brand new floor pans for the driver side front and rear. I am looking to sell them for $100 for both. Shipping would be an additional cost at your expense. I'm located in Buffalo, N.Y. The best way to contact me is my cell. My name is Mike and the number is (716)- 796- ONE ONE FIVE

I have for sale a pair of rocker panels for the XJ Cherokee. I have two driver sides but i believe the other one could be modified to fix other side. I'm looking to get $60 for the pair. Shipping would be an additional cost at your expense. These are stock replacements that are located underneath th

New Rocker Panels- stock replacements. I have two driver sides. Other one can be modified to fix other side. I'm looking to get $60 for the pair, plus shipping costs. I'm located in Buffalo, N.Y. The best way to contact me is on my cell. My name is Mike and my number is (716)-796- ONE ONE FIVE THREE

I have for sale a pair of rocker panels for the XJ Cherokee. I have two driver sides but i believe the other one could be modified to fix other side. I'm looking to get $60 for the pair. Shipping would be an additional cost at your expense. These are stock replacements that are located underneath th

41 Comments, last updated on Wednesday Sep 1 by Beware of this bank

my hubby said the ele gauge dropped so he thought the alternator died.. so he replaced the alt.. yesterday.. the jeep ran fine all day.. then tried to crank it this morning and it wont start no sounds or nothing. tested battery and starter at parts store they said they were both fine.. any suggesti

I have read many of the forums and have decided to post this because I can't seem to find anything that fits my exact problem. So here is what is going on: I have a 96 Grand Cherokee Limited, V-8, towing package, it does have high miles and a not so recent issue and a recent issue. Like a few oth

jeeps,jeeps,jeeps, and a ton of trucks too. ;) [IMG]http://i249.photobucket.com/albums/gg202/vermonster4x4/FLYERDRAFT_edited-1.jpg[/IMG]

How about roll cages like what's better weld in or bolt in cross members or how to build a cage right! I mean I don't think about it till I have that o crap feeling!! I would love to see a write up on that because I'm Looking to buy and after market cage and wanna know what is just a gimmick and wha

How about roll cages like what's better weld in or bolt in cross members or how to build a cage right! I mean I know me don't think about it till I'm about to roll over or have that o crap feeling!!

[img]http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs023.snc1/4259_1087972992780_1030096924_30246040_7668731_n.jpg[/img] [img]http://sphotos.ak.fbcdn.net/photos-ak-snc1/v2679/186/88/1030096924/n1030096924_30240232_3491525.jpg[/img]

Just got my 96 Cherokee back from the mechanics and he's saying that real soon I'm gonna need to replace both front u-joints and axles. I don't feel comfortable just letting someone else put parts into the truck without researching them first so I'll probably get the parts myself. So, I'm writing

I've got a 96 Cherokee w/ 115k, and my mechanic who I generally trust is telling me I need both front u-joints and axles replaced. As a guy who's generally handy with replacing alternators and water pumps and such, can yall tell me what I need to look for in these pieces when I get under the truc

This is my first with a site like this, can anyone tell me where i can buy chassis parts? i am looking for the very rear cross member that the bumper connects to, mine was cracked and badly bent.

Anyone know or could recommend a strong Tranny/Transfer Case Skid plate replacement for a 92 YJ 4.0. I've done some searching on the net and in the Quadratec catalog and only see them being made by a few companies. Fabtech and AVE or something along those lines to name a couple. My stocker is pr